Polycom DOC2066F manual Muting and Unmuting Participant’s Audio

MGC Manager User’s Guide - VoicePlus Edition

2.Move the slider to the right or to the left to increase or to lower the Broadcasting or Listening Volume level for a participant:

—The Volume scale is between 1 to 10, where 1 is the lowest and 10 is the highest. The default volume at the connection time is 5.

—Each movement of the Volume slider increases or reduces the volume by one unit that is equivalent to 3 dB.

3.Click OK.

Participants in an On Going Conference can adjust the volume of the audio transmitted from and to their endpoint, using the appropriate DTMF code:

•Broadcasting volume: to increase the volume, use *9; to lower - #9.

•Listening volume: to increase, use *76; to lower - #76.

Muting and Unmuting Participant’s Audio

Occasionally, a conference organizer may want to exclude the audio of a specific participant from part of an On Going Conference. A participant whose audio channel is muted hears the other participants while the other participants cannot hear the muted participant.

Participants’ audio can be muted by the MCU, by the operator, by themselves or by a combination MCU/operator; Operator/participant

For listing of audio status icons, see Table 3-4, “Participant Audio Status Icons,” on page 3-16.

Participants can mute their audio transmission from their own endpoints, using DTMF codes. The default DTMF code for muting individual’s line is *6, and #6 for unmuting the line. Muting By Participant is indicated by a

special icon.

You can mute a participant's audio from the participant's right-click menu or in the Participant Properties dialog box.

4-17