Polycom DOC2066F manual Operation Default Description, Code

MGC Manager User’s Guide - VoicePlus Edition

YES (default) is set to NO.

•Roll Call is not supported with the Guidance feature or when the participant is moved from the Operator conference (attended status) to the Home Conference.

•Roll Call is not supported when the participant is moved from one conference to another. The participant name is not announced when the participant leaves the first conference and enters the second conference.

•Roll Call is not supported with the Invite feature. When a participant is invited to the conference by the chairperson, the invitee name is not recorded and therefore not announced when the participant enters or leaves the conference or during the Roll Call.

Table 4-6 lists the Roll Call actions and the corresponding DTMF codes.

Table 4-6: Roll Call DTMF Options

Operation	Default	Description
	DTMF
	Code
Enable Roll Call	*32	Enables the Roll Call feature for the
		conference.
Disable Roll Call	#32	Disabled, the Roll Call feature for the
		conference. However, participants names are
		still recorded in case the Roll Call feature will
		be enabled later, during the conference.
Roll Call Review	*33	Requests to play the recorded names of the
Names		participants connected to the conference, one
		after the other, in the order in which they
		entered the conference.
Roll Call Stop	#33	When requested, the system stops the Roll Call
Review Names		playback.

4-73