Polycom DOC2066F manual Entry Queue

Chapter 2 - Defining Standard Audio Only Conferences and Reservations

Table 2-1: Conference Properties - General (Continued)

Field/Option	Description
Entry Queue	Select this option when a single-dial Entry Queue is used for
Access	participant access to all conferences. Participants are routed
	from the Entry Queue to their “Home” conference using the
	conference Numeric ID or password, depending on the MCU
	configuration.
Meet Me Per	Select this option to enable undefined participants to connect
Conf	to a conference by dialing the conference dial-in number.
	Undefined participants are those who were not defined prior
	to the conference start.
	When this option is selected, a dial-in number (ISDN
	participant) or a string (H.323 participant) is assigned to the
	conference by the system or manually by the operator.
	If the Entry Queue Access option is selected for the
	conference, and you do not want to assign an additional
	ISDN dial-in number to the conference, do not select this
	option.
	Selecting this option activates the Meet Me per Conference
	tab. To define the Meet Me per Conference properties, see
	“Defining a New Audio Only Meeting Room” on page 5-4.
	Note: If a conference is set as both Entry Queue Access and
	Meet Me Per Conf to which a separate ISDN dial-in number
	is assigned, participants can connect to the conference by
	means of the Entry Queue and directly using this number. If
	you do not require the direct dialing to the conference or you
	want to conserve the number of dial-in numbers, select
	either the Meet Me Per Conf option or the Entry Queue
	Access option.

2-18