MMB
CHAPTER 3
Item | Description |
Status | Fan status: |
| • OK: Operating normally |
| • Not present: Not installed |
| • Failed: Fan failure |
|
|
Fan Speed(rpm) | Fan speed (rpm). |
Threshold(rpm) | Lower limit of the fan speed (Any speed lower than this setting is |
| abnormal.) |
|
|
| Table 3.21 Button in the [Fans] window | |
|
|
|
Button |
| Description |
Status Clear |
| Click the [Status Clear] button to display the [Fans Status Clear] |
|
| window. This window enables clearing of the fan statuses. |
|
|
|
(1)Menu operation
[System] → [Fans]
(2)GUI operation
1Click the [Status Clear] button.
The [Fans Status Clear] window is displayed.
2Follow the clearing process in the [Fans Status Clear] window. The fan statuses are cleared.
3.2.9.1Fans Status Clear window
Once an abnormality is detected in a fan, the fan remains in the abnormal status until the fan is replaced or the abnormal status is cleared.
The abnormal status of a fan can be cleared using the [Fans Status Clear] window.
Note: After the abnormal status of a fan is cleared, if an abnormal fan speed is detected in the fan, the fan is placed in the [Failed] status again. Clearing the status of a fan with an abnormal fan speed does not change its status from [Failed].