GSWB
CHAPTER 7
Item | Description |
Interface | Specify the interface (default: IO_Unit): |
| • IO_Unit (default): Specify an I/O unit (00 to 71). Default: 00 |
| • GigabitEthernet: Specify GigabitEthernet (0/1 to 0/8). |
| • 10GigabitEthernet: Specify 10GigabitEthernet (1/1 to 1/2). |
| • |
|
|
VLAN ID | Specify a VLAN ID (1 to 4094). |
MAC Address | Specify the station MAC address (0x00 to 0xFF). |
Status | Specify the type of addresses to be displayed: |
| • Static (default): Displays static addresses only. |
| • Dynamic: Displays dynamic addresses only. |
|
|
Chip Number | Specify a chip number (1 to 4). |
Table 7.77 | Buttons in the [MAC Address Table] window |
|
|
Button | Description |
Help | Displays the Help window. |
Query | Displays search results after a search is completed. |
Clear | Clears dynamic entries. Static entries are not cleared. |
Next | If number of entries to be displayed exceeds 1024, clicking this |
| button displays the next 1024 entries. The [Next] button is |
| displayed only if there are still entries to be displayed after the |
| [Query] button is clicked. |
|
|
Cancel | Returns to the initial [MAC Address Table] window. This button |
| is displayed only after the [Query] button is clicked. |
|
|
(1) Menu operation
[Switch] → [GSWB#x] → [MAC Bridge] → [MAC Address Table]
(2)GUI operation
•Display
1Specify the search conditions. Multiple search conditions cannot be specified.
2Click the [Query] button.
3Only entries that matched the search conditions are displayed.
•Clearing
1To clear dynamic MAC address entries, click the [Clear] button.
2The confirmation window is displayed. Clicking the [OK] button clears the dynamic entries.
3All dynamic entries are cleared, regardless of the search conditions.