GSWB

CHAPTER 8 CLI Operations

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

• vlan id doesn’t exist.

Cause: The specified VLAN does not exist.

Action: Reenter the command after creating a VLAN.

• Invalid switchport mode.

Cause: The VLAN membership mode is not access.

Action: Reenter the command after changing the mode to access.

•It is necessary to review specified VLAN and port.

Cause: The VLAN and port definitions do not match.

Action: Review the VLAN and port definitions.

8.2.10Priority control functions (Class of Service)

8.2.10.1 switchport priority default

This command sets the default priority to frames without tags. The command is not applicable to IEEE802.1Q VLAN tagged frames.

When making this setting for a port-channel port, no setting is required for a physical link that is a part of the target port-channel. The contents of settings made for such links are not reflected. The setting for a physical link in the port-channel is reflected in the physical link at the time the link is removed from the port-channel.

(1)Synopsis

•Sets the default priority to frames without tags

switchport priority default <default-priority-id>

8-78

C122-E003-02EN