GSWB 8.3 Operation Commands

8.3.7STP-related commands

8.3.7.1show spanning-tree status

This command displays the STP status.

If this command is executed with an option specified, the command cannot be interrupted by the [Ctrl] + [c] keys.

(1) Synopsis

show spanning-tree status [bridge interface <interface-id>]

(2) Options

zbridge (optional): Specifies bridge information.

zinterface <interface-id> (optional)

Specifies the interface whose STP status is to be displayed. If this parameter is omitted, all [bridge] and [interface] information is displayed.

-GigabitEthernet 0/1-8

-IOU 0 0-7 1

-TenGigabitEthernet 1/1-2

-port-channel 1-7

If no port-channel port has been created or no TenGigabitEthernet is mounted, settings of the corresponding interface are displayed.

While the STP configuration is being changed (topology change), some bridge information is not displayed. When the topology has been changed, all bridge information is displayed.

(3)Command Mode user exec

enabled exec

(4)See also

None

C122-E003-02EN

8-231