GSWB 8.2 Configuration Definition Commands

• igmp static exists.

Cause: The ip igmp snooping vlan static setting is enabled.

Action: Disable the ip igmp snooping vlan static setting, and reexecute the command.

8.2.12.3 ip igmp snooping vlan mrouter

This command specifies a multicast router port.

If a channel group is specified in <interface-id>, the anchor port is set as the multicast router port.

(1)Synopsis

•Specifies a multicast router port

ip igmp snooping vlan mrouter interface <interface-id>

• Deletes a multicast router port

no ip igmp snooping vlan mrouter interface <interface-id>

(2) Options

z<interface-id>

Specifies the interface and port number (GigabitEthernet 0/1 to 0/8, IO_Units 00 to 71, TenGigabitEthernet 1/1 to 1/2, port-channels 1 to 7, ports 1 to 33) to be set for the router port.

(3) Command mode

VLAN configuration mode

(4) See also

ip igmp snooping

p igmp snooping vlan

(5)Examples

•Specifies an interface as a multicast router port of a VLAN

Switch(config-vlan)# ip igmp snooping vlan mrouter interface GigabitEthernet 0/1

Switch(config-vlan)#

C122-E003-02EN

8-91