MMB 3.5 Network Configuration Menu
Table 3.114 Displayed and setting items in the [Edit Filter] window
Item | Description |
Protocol | Select the target protocol for IP filtering from the pulldown list: |
| • HTTP |
| • HTTPS |
| • Telnet |
| • SSH |
| • SNMP |
|
|
Access Control | Select the [Enable] or [Disable] radio button to specify whether to |
| use access control. |
| Selecting [Disable] permits access from any IP address using the |
| protocol selected above. Furthermore, the [IP Address] and |
| [Subnet Mask] fields described below are grayed out, and input to |
| them is not possible. |
| Selecting [Enable] enables input in the [IP Address] and [Subnet |
| Mask] fields and permits access from the specified IP address |
| using the protocol selected in [Protocol]. |
|
|
IP Address | Enter an IP address that has access permission. |
Subnet Mask | Enter the subnet mask of IP addresses that have access permission. |
| Table 3.115 Buttons in the [Edit Filter] window | |
|
|
|
Button |
| Description |
Apply |
| After completing the [Protocol], [Access Control], and/or other |
|
| settings, click the [Apply] button. The specified information takes |
|
| effect on the system. |
|
|
|
Cancel |
| Click the [Cancel] button to revert to the original settings for the |
|
| protocol and access control. |
|
|
|
(1) Menu operation
[Network Configuration] → [Access Control] → [Add Filter]/[Edit Filter]
(2)GUI operation
1Make [Protocol], [Access Control], and/or other settings, enter an IP address and a subnet mask, and then click the [Apply] button.
Additions or changes are then made to management information accordingly.