GSWB 8.2 Configuration Definition Commands
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
8.2.8.4spanning-tree hello-time
This command sets the transmission interval of Hello messages.
Note: The Hello time is the time interval at which Hello messages (root configuration information in STP) are sent by the root bridge.
(1)Synopsis
•Specifies the transmission interval of Hello messages
•Resets the transmission interval of Hello messages to the default value no
(2)Options
z<seconds>
Specifies the Hello time (s). The setting range is 1 to 10, and the default value is 2.
(3)Command mode
Global
(4)See also
(5)Examples
•Sets the Hello time of the spanning tree to 1 s for all instances