GSWB 8.2 Configuration Definition Commands
(2)Options
None
(3)Command mode
Global
(4)See also
show ldap
(5)Examples
•Enables ldap over ssl
Switch(config)# ldap ssl enable
Switch(config)#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.