GSWB 8.2 Configuration Definition Commands

8.2.6Host functions (address definition)

8.2.6.1ip host

This command specifies an IP address or how to acquire it. Only one IP address can be specified for the device.

If no VLAN is specified, the default VLAN (vlan id 1) is set. The default ip-address is 0.0.0.0, and the default subnet mask is 0.0.0.0.

The IP address cannot be reset to the default value while ip default-gateway is set.

If you specify ip host bootp/dhcp, you need to execute ip dhcp restart.

(1)Synopsis

•Specifies an IP address or how to acquire the address

ip host {<ip-address> <subnet-mask> bootp/dhcp} [vlan <vlan-id>]

•Sets an IP address to the default value no ip host

(2)Options

z{<ip-address> <subnet-mask> bootp/dhcp}

-<ip-address>: Sets the IP address statically.

-<subnet-mask>: Specifies the subnet mask.

-bootp/dhcp: Sets the dynamic IP address automatically by DHCP.

zvlan <vlan-id> (optional): Specifies a VLAN.

If this option is omitted, VLAN(vlanid1) is assumed by default.

(3)Command mode

Global

(4) See also

ip dhcp restart

ip default-gateway

vlan

C122-E003-02EN

8-43