PSA
CHAPTER 5
Item | Description |
Alignment Errors | Number of packets received by the selected interface and found to |
| have an incorrect length because the number of bytes is not an |
| integer. The cause is low transmission quality. |
| Currently, 0 is displayed for this item as a fixed setting. |
|
|
Frame Too Long | Number of packets received by the selected interface and found to |
| be longer than the maximum packet length (1,518 bytes) |
|
|
MAC Receive Errors | Number of packets that could not be properly received because of |
| an internal error in the MAC layer |
|
|
Table 5.9 | Buttons in the [Ethernet Controller] window |
|
|
Button | Description |
Status Clear | The [Status Clear] button is displayed only for a setting privilege |
| user. |
| Check the [Status] check box in [PCI Device Information], click |
| the [Status Clear] button, and the [Confirm Settings] dialog box |
| opens. Click the [OK] button in the [Confirm Settings] dialog box |
| to clear the status of the Ethernet controller. |
| If the notification suppression function is active to suppress mail/ |
| REMCS/SNMPtrap notification, this button deactivates the |
| notification suppression function. |
|
|
Return | Click the [Return] button to return to the [PCI Devices] window. |
(1) Menu operation
[Partition] → [Partition #x] → [PSA] → [PCI Devices] → [Unit]
(2)GUI operation
•Clearing the status of the Ethernet controller
1Check the [Status] check box, and click the [Status Clear] button. The [Confirm Settings] dialog box opens.
2Click the [OK] button in the [Confirm Settings] dialog box. The status of the Ethernet controller is cleared.
3Click the [Return] button.
The [PCI Devices] window is displayed again.
•Leaving the status of the Ethernet controller as is
1Click the [Return] button.
The [PCI Devices] window is displayed again.