GSWB 8.2 Configuration Definition Commands

(1)Synopsis

•Sets host or network conditions to allow remote connections

remote-access {all telnet ssh } {all <ip-address> [<subnet-mask>]}

• Deletes the host or network conditions that allow remote connections

no remote-access {all telnet ssh } {all <ip-address> }

(2) Options

z{all telnet ssh } Specifies the protocol.

-all: Specifies both telnet and ssh.

-telnet: Specifies telnet.

-ssh: Specifies ssh.

z{all <ip-address> [<subnet-mask>]}

-all: Specifies all IP addresses.

-<ip-address> [<subnet-mask>]: Specifies the IP address or network address for which remote access is permitted.

-<subnet-mask>: Specifies the subnet mask.

If the IP address of a specific host is specified in <ip-address>, the subnet mask need not be specified. However, the subnet mask is required for a specific network.

(3)Command mode

Global

(4)See also telnet enable

ssh enable

show remote-access

C122-E003-02EN

8-107