GSWB 8.1 Basic CLI Operations

zWhen "--More--" is displayed, if the [Enter] key is pressed, the screen scrolls up one line. If the space character is entered, the next screen is displayed. Pressing the [q] key or [Q] key quits the display. If the [g] key or [G] key is pressed, the last screen of the contents is displayed.

8.1.6.10Tab-based complement function

If the [Tab] key is pressed during entry of a command, it adds the string that can be concatenated with the entered string.

Example: terminal command

Switch# termi<tab>

>Switch# terminal

*The tab-based complement function and function keys can be used on terminals of the ANSI system, VT100 system, VT200 system, KTERM, XTERM, CON25, LINUX, or SCREEN type. The show terminal status command can be used to check the current terminal type.

8.1.6.11Error messages

If the [Enter] or [?] key is pressed during entry of an operation command and the string is not recognized, an error message is displayed. The following table lists the error messages that are common to all of the operation commands.

Table 8.7 Error messages of the operation commands

Error message

Error cause

Action to be taken

% Unrecognized command

An invalid command and "?"

Check the entered command.

 

were entered.

 

 

 

 

% Ambiguous command:

An unrecognizable command

Check the entered command.

"XXX"

abbreviation was entered

 

XXX: Entered command

(e.g., open c ?).

 

 

 

 

No Memory

Insufficient memory

Restart the device.

Fatal error

A fatal error occurred.

Restart the device. Replace

 

 

the firmware.

 

 

 

C122-E003-02EN

8-13