GSWB
CHAPTER 8 CLI Operations
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.3.11.4 show ip igmp snooping statistics
This command displays statistical information on IGMPSnooping.
The number of received packets is displayed only for a VLAN for which IGMPSnooping is enabled. If IGMPSnooping is disabled for the whole unit, the number of received packets is not displayed for any VLAN.
(1) Synopsis
show ip igmp snooping statistics [vlan
(2) Options
zvlan
Specifies the VLAN ID whose statistical information is to be displayed.
If this parameter is omitted, statistical information on all VLANs defined on the switch is displayed.
(3)Command mode
enabled exec
user exec