MMB
CHAPTER 3
Table 3.31 Displayed and setting items in the [XAI#x] window
Item |
| Description |
Board Information |
|
|
Status | XAI board status: | |
| • | OK: Operating normally |
| • Not present: Not installed | |
| • Degraded: Component failure. (The faulty component can be | |
|
| isolated to continue operation.) |
| • | Failed: Failure |
|
| |
Power Status | XAI board power status: | |
| • | On: Powered on |
| • | Standby: Standby mode |
|
| |
Part Number | XAI board part number | |
Serial Number | XAI board serial number | |
Location LED | Location LED status | |
| The three light statuses are as follows: | |
| • | On: Currently lit |
| • Off: Currently not lit | |
| • | Blink: Currently blinking |
| The LED can be turned on, turned off, or set to blink by clicking a | |
| radio button. | |
|
|
|
Chipsets |
|
|
GAC | GAC status: | |
| • | OK: Operating normally |
| • Warning: Operating but requires maintenance (contact a | |
|
| certified service engineer). |
| • | Failed: Failure |
|
|
|
|
| |
Redundancy | Indicates the redundancy statuses of | |
| 01. | |
| • Redundant: The converters are redundant. | |
| • | |
|
| lost redundancy, but are sufficient for system operation. |
| • | |
|
| lost redundancy and are insufficient for system operation. |
|
| |
DDC#00 to DDC#01 | ||
| • | OK: Operating normally |
| • Not present: Not installed | |
| • | Failed: Failure |
| • Configuration error: Configuration error | |
|
|
|
Voltage |
|
|
Sensor | Voltage sensor type | |