GSWB
CHAPTER 8 CLI Operations
save
tftp
(5)Examples
•Copies the configuration definition file of the booting memory bank to the work area
Switch# save config
Switch#
• Copies configuration definition file config0 to the work area
Switch# save config config0
Switch#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Open error.
Cause: The specified configuration definition file does not exist.
Action: Make sure the configuration definition file exists.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Command is already running.
Cause: One of the following commands is running.
clear config / clear ramdisk / restore config / save / save config / tftp
Action: Reexecute after exiting the command.