GSWB 8.2 Configuration Definition Commands

• vlan id doesn’t exist.

Cause: The specified VLAN does not exist.

Action: Reenter the command after creating a VLAN.

•It is necessary to review specified VLAN and port.

Cause: The VLAN and port definitions do not match.

Action: Review the VLAN and port definitions.

8.2.9.4switchport allowed vlan

This command specifies trunk properties:

zThe VLANs that can be used in Trunk mode are determined by this command and the switchport native vlan command.

zTrunk mode must be set before this command is executed.

zA single VLAN or a range of consecutive VLANs is specified in a setting.

zThe default setting is [add 1].

zSince each interface must be a part of at least one VLAN, all VLANs cannot be deleted by using "remove."

zBefore the default VLAN 1 is deleted, another VLAN must be added.

When making this setting for a port-channel port, no setting is required for a physical link that is a part of the target port-channel. The contents of settings made for such links are not reflected. The setting for a physical link in the port-channel is reflected in the physical link at the time the link is removed from the port-channel.

(1)Synopsis

•Specifies interface properties for operation of an interface in Trunk mode (tagged VLAN mode)

switchport allowed vlan <vlan-list>

•Specifies trunk properties for a member of the default VLAN no switchport allowed vlan

C122-E003-02EN

8-73