GSWB 8.2 Configuration Definition Commands

•Specifies that a user be set with the user name "b-sss", authentication level "priv," password encryption "sha," and read-only privilege

Switch(config)# snmp-server user b-sss ro priv sha asdfasdf iuytrewq Switch(config)#

• Uses the show command to check settings

Switch(config)# show snmp-server user Switch(config)#snmp-server user aaaaa1 ro noauth Switch(config)#snmp-server user aaaaa2 ro noauth Switch(config)#snmp-server user aaaaa3 ro noauth Switch(config)#show snmp-server user snmp-server user aaaaa1 ro noauth

snmp-server user aaaaa2 ro noauth snmp-server user aaaaa3 ro noauth Switch(config)#

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

• Input parameter error.

Cause: The specified user name, authentication password, or encryption passphrase is incorrect.

Action: Specify the correct user name, authentication password, and encryption passphrase.

C122-E003-02EN

8-119