GSWB 8.2 Configuration Definition Commands
8.2Configuration Definition Commands
This section describes the configuration definition commands.
8.2.1Configuration definition management commands
The configuration definition management commands manipulate the configuration definition file.
8.2.1.1open
This command starts editing of the configuration definition file.
(1) Synopsis
open {config0 config1}
(2) Options
z{config0 config1}
-config0: Specifies config0.
-config1: Specifies config1.
(3)Command mode
Global configuration
(4)See also close
exit
(5)Examples
•Starts editing of the configuration definition file
Switch# open config0
Switch(edit)#