GSWB 8.2 Configuration Definition Commands
no
(2)Options
None
(3)Command mode
Global
(4)See also
(5)Examples
•Disables STP for the whole device
Switch(config)# no
Switch(config)#
(6)Error Messages
•% Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
• Specify bpdufilter invalid.
Cause: Enabling STP was attempted while BPDU frame forwarding was enabled.