GSWB 7.3 Configuration Copy Menu
Table 7.14 Displayed or setting item in the [Configuration Copy] window
Item | Description |
Select the direction of copy | |
Copy from GSWB#0 | Copies settings from GSWB#0 to GSWB#1. |
to GSWB#1 |
|
|
|
Copy from GSWB#1 | Copies settings from GSWB#1 to GSWB#0. |
to GSWB#0 |
|
|
|
Select the configuration | file ID |
config 0 | config0 copies config 0 |
config 1 | config1 copies config 1 |
Table 7.15 Buttons in the [Configuration Copy] window
Button | Description |
Help | Displays the Help window. |
Apply | Sets the specified value. |
Cancel | Closes the window without saving the change. |
(1) Menu operation
[Switch] → [Configuration Copy]
(2)GUI operation
•Copying
1Select the copy source GSWB and copy destination GSWB from [Select the direction of copy], and specify the ID of the configuration definition file to be copied in [Select the configuration file ID].
Since two GSWB configuration definitions (config0 and config1) can be saved, select which configuration definition file on the GSWB to copy.
2Click the [Apply] button.
Note:
-Before the switching operation can be performed based on the copied configuration definition file, you need to change the configuration in the [Active Image Change] window so that the configuration file is used at the time of startup, and then restart the GSWB.
-After the configuration definition file is copied, the specified configuration definition file comment will be "configuration copy."
-[Copy Source] is not selected on the initial display.