GSWB 8.3 Operation Commands
(5)Examples
•Displays information on multicast router ports of all VLANs
Switch# show igmp snooping mrouter
Vlan Ports
-----
1 18 GigabitEthernet 0/2(static)
1 19 GigabitEthernet 0/3(dynamic)
2 20 GigabitEthernet 0/4(static)
2 21 GigabitEthernet 0/5(dynamic) Switch#
•Displays information on multicast router ports of the specified VLAN
Switch# show ip igmp snooping mrouter vlan 1
Vlan Ports
-----
1 18 GigabitEthernet 0/2(static)
1 19 GigabitEthernet 0/3(dynamic) Switch#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.