CHAPTER 4 CLI Operations
This chapter describes operations performed to run and manage the PRIMEQUEST- series machine via the command line interface (CLI).
4.1Basic CLI Operations
This section describes the command line interface (CLI) provided with the MMB.
The CLI can be accessed in either of the following two ways:
zThrough the MMB serial port
zFrom a remote PC via the MMB management LAN
4.1.1Access through the serial interface
1Connect the MMB to the user terminal (e.g., notebook PC) with an
2Launch the terminal software (e.g., Windows HyperTerminal) on the terminal, and set up the terminal software as follows.
Table 4.1 Setting items of terminal software
Setting item | Value |
Bits per second | 19200 |
Data bit | 8 |
Parity | None |
Stop bit | 1 |
Flow control | None |
Emulation | VT100 |
3Enter a user name and password to log in when the login prompt is displayed.