GSWB 8.2 Configuration Definition Commands

8.2.17SNMP

8.2.17.1 snmp-server engineID local

This command specifies the SNMP engine ID of a local device. The default value is "0x000000000000000000000000".

(1)Synopsis

•Specifies the SNMP engine ID of a local device

snmp-server engineID local <engineid-string>

•Resets the SNMP engine ID of a local device to the default value no snmp-server engineID local

(2)Options

z<engineid-string>

A 10-digit to 24-digit hexadecimal string specifies the ID. "0x" at the beginning of the string may be omitted. If "0x" is entered, it is not included in the number of digits.

If the entered string consists of 23 or fewer digits, the engineID value is padded with "0" up to the 24th digit. This item need not be set if SNMP v3 is not used.

(3)Command mode

Global

(4) See also

snmp-server enable traps

show snmp-server

(5)Examples

•Sets the SNMP engine ID of a local device

Switch(config)# snmp-server engineID local 0x1234000000 Switch(config)#

C122-E003-02EN

8-113