GSWB 8.2 Configuration Definition Commands

(6)Error Messages

•% Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

•Internal communication error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

• Input parameter error.

Cause: The specified [contact] is invalid.

Action: Enter a correct value.

8.2.17.4 snmp-server user

This command specifies a user to be connected from the server using SNMP v3. Unless snmp v3 is used, no user need be specified. By default, no user is specified.

zMaximum number of users: 8

zDES is used for encrypting packets.

(1)Synopsis

•Specifies a user to be connected from a server using SNMP v3

snmp-server user <user> { rw ro } { noauth auth {md5 sha} <password> priv {md5 sha} <password> <passphrase>}

• Deletes the specified user

no snmp-server user <user>

C122-E003-02EN

8-117