GSWB
CHAPTER 7
Item | Description |
Authentication | Authentication method: |
| • noauth: An authentication method is set. |
| authentication and encryption are not performed. (However, |
| authentication by user name is performed.) |
| • auth: Authentication uses passwords. Encryption is not |
| performed. |
| • priv: |
| performed. |
| • md5: MD5 is selected as the hash function for password |
| encryption. |
| • sha: SHA is selected as the hash function for password |
| encryption. |
|
|
Password | Authentication password. |
| • Character string: 8 to 16 |
|
|
Passphrase | Passphrase (keyword for packet encryption). |
| • Character string: 8 to 16 |
|
|
| Table 7.47 Buttons in the [SNMP Trap] window | |
|
|
|
Button |
| Description |
Help |
| Displays the Help window. |
Apply |
| Sets the specified values. |
Cancel |
| Closes the window without saving the change. |
(1) Menu operation
[Switch] → [GSWB#x] → [Management] → [SNMP] → [SNMP Trap]
(2)GUI operation
•SNMP Trap addition or modification
1Check the check box of the SNMP Trap to be added or modified.
2Specify the IP address and SNMP version.
3The setting method is as follows:
•If you select SNMP version 1 or 2, specify [Community String].
•If you select SNMP version 3, Specify [User Name] and [Authentication].
•If you select [auth] or [priv] for [Authentication], select [sha] and [md5]. Then enter the password if you select [auth] or enter the password and passphrase if you select [priv].
4Click the [Apply] button.