GSWB 8.2 Configuration Definition Commands

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

8.2.8.9spanning-tree

This command enables or disables the spanning tree protocol on the specified interface. The settings are reflected in the device only if STP (8.2.8.1) is enabled for the whole device.

When making this setting for a port-channel port, no setting is required for a physical link that is part of the target port-channel. The contents of settings made for such links are not reflected. The setting for a physical link in the port-channel is reflected in the physical link at the time the link is removed from the port-channel.

(1)Synopsis

•Enables the spanning tree protocol for the specified interface when STP is enabled for the whole device (default: Enable)

spanning-tree

•Disables the spanning tree protocol for the specified interface no spanning-tree

(2)Options

None

(3)Command mode

Interface configuration

(4)See also

spanning-tree (Global)

(5)Examples

•Disables the STP function on a port

C122-E003-02EN

8-65