|
|
| MMB |
|
|
| 3.5 Network Configuration Menu |
|
|
|
|
|
|
|
|
| Item |
| Description |
| NTP |
| Enable or disable the NTP function. |
|
|
| If [Enable] is specified, the MMB synchronizes the NTP server |
|
|
| time settings on NTP1 to NTP3, which are listed below. |
|
|
| • Enable: Enable the NTP function. |
|
|
| • Disable: Disable the NTP function. |
|
|
| To use the MMB as an NTP server from another client, [Enable] |
|
|
| must be set for the NTP function. |
|
|
| The default setting is [Disable]. |
|
|
|
|
| NTP Server1 |
| Specify the IP address of the primary NTP server. (This setting is |
|
|
| valid only if [Enable] is set for the NTP function.) |
|
|
|
|
| NTP Server2 |
| Specify the IP address of the secondary NTP server. (This setting |
|
|
| is valid only if [Enable] is set for the NTP function.) |
|
|
|
|
| NTP Server3 |
| Specify the IP address of the tertiary NTP server (This setting is |
|
|
| valid only if [Enable] is set for the NTP function. If the setting is |
|
|
| [Disable], this item is grayed out.) |
|
|
|
|
| The Latest Sync |
| Date and time of the latest time synchronization between the |
| Data/Time |
| specified NTP server and the MMB |
|
|
|
|
|
| Table 3.85 Buttons in the [Date/Time] window | |
|
|
|
|
| Button |
| Description |
| Apply |
| Specify a date, time zone, etc., and click the [Apply] button to set |
|
|
| the specified values. |
|
|
|
|
| Cancel |
| Click the [Cancel] button to revert to the original settings for the |
|
|
| date, time zone, etc. |
|
|
|
|
(1) Menu operation
[Network Configuration] → [Date/Time]
(2)GUI operation
1Specify a date, time zone, etc., and click the [Apply] button. The specified date, time zone, etc., are then set.