GSWB 8.2 Configuration Definition Commands
Action: Collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.2.2exit
This command causes a transition to the previous command mode or exits the current command mode. If the command is executed in global configuration mode, editing of all configuration definitions being edited is terminated, and the associated configuration definition command is terminated.
(1) Synopsis
exit
(2)Options
None
(3)Command mode
All
(4)See also configure
open
(5)Examples
•Returns to the previous command mode or exits the current command mode
Switch(config)# exit
Switch# exit