MMB 3.2 System Menu
3.2.5System Setup window
The [System Setup] window allows you to specify PRIMEQUEST Power Feed mode settings and Power Restore actions.
Figure 3.7 System Setup window
Table 3.13 Displayed and setting items in the [System Configuration] window
Item | Description |
Power Feed Mode | The user can set either single power feed mode or dual power feed |
| mode for the power supply to the |
| • Single: Single power feed mode |
| • Dual: Dual power feed mode |
| The default setting is [Single]. |
|
|
Power Restoration | The user can specify the action taken for power recovery in the |
Policy | event of a power failure, and this setting is displayed: |
| • Always off: Keeps power off after power recovery. |
| • Always on: Turns power on after power recovery regardless of |
| the status at the time of the power failure. |
| • Restore: Restores the status at the time of the power failure. |
| That is, if power was on at the time of the power failure, power |
| is turned on, and if power was off, power is kept off. |
| The default setting is [Restore]. |
|
|