GSWB 8.3 Operation Commands

• % Invalid input detected at '^' marker.

Cause: Invalid character detected at '^' marker in the entered command string

Action: Enter the command string correctly.

• System error.

Cause: An internal error occurred.

Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.

8.3.3.3show interface switchport

This command displays interface settings.

When the interface is in access mode, the access vlan id is displayed in Allowed VLAN and Native VLAN.

(1) Synopsis

show interface switchport <interface-id>

(2) Options

z<interface-id>: Specifies the interface whose settings are to be displayed.

-GigabitEthernet 0/1-8

-IO_Unit 0 0-7 1

-TenGigabitEthernet 1/1-2

-port-channel 1-7

-port 1-33

(3)Command Mode

user exec

enabled exec

(4)See also show vlan

show wrr-queue cos-map

C122-E003-02EN

8-191