GSWB 8.3 Operation Commands
(2) Options
z<chip> (optional): Specifies the Chip No whose number of entries is to be displayed (1 to 4).
If this parameter is omitted, the total number of entries of all chips is displayed.
(3)Command Mode
user exec
enabled exec
(4)See also
None
(5)Examples
•Displays the number of registered entries
Switch# show bridge summary
Registered station blocks : 7013
Switch#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.