CHAPTER 11 DVD Retry Boot

When configuring boot operation using the MMB Web-UI [Boot Control] menu, you can specify that the boot processing be retried from the DVD in case of a boot failure.

This chapter describes the steps for executing a DVD boot retry.

Figure 11.1 shows an example of a window displayed during DVD retry boot processing.

----------------------------------------------------------------------------

Confirm that the preparation of the built-in DVD drive has been ready and press an Enter key.

Enter key - DVD boot Esc key - System Reset

----------------------------------------------------------------------------

Retry count: 0 (<=3)

Booting from DVD starts automatically in 180 seconds

Figure 11.1 Sample window for DVD retry boot processing

(1)Window operation steps

1When DVD retry boot processing begins, the confirmation message shown below is displayed together with the number of retries up to this point and the number of seconds remaining until the next boot.

The example shows that 0 retries have been executed (out of 3 possible retries) and the next reboot will start in 180 seconds.

----------------------------------------------------------------------------

Confirm that the preparation of the built-in DVD drive has been ready and press an Enter key.

Enter key

-

DVD boot

Esc key

-

System Reset

----------------------------------------------------------------------------

C122-E003-02EN

11-1