Basics 2.8 Switching to Operations with Software of Another Type
EFIThe EFI is used for special cases such as for changing boot control.
1Specify an instruction to wait at EFI [Boot Manager Menu] during boot of the relevant partition, from the [Boot Control] menu of the MMB
2Start the partition from the MMB
→ The EFI [Boot Manager Menu] window is displayed.
*1 To log in to the MMB via telnet or SSH from an external device, you need to click [Network Configuration] and [Network Protocols] in that order and set the necessary parameters to [Enable] in the [Network Protocols] window.
*2 To log in to GSWB#0 or GSWB#1 via telnet or SSH from an external device, you can use one of two methods below:
-Click [Switch], [GSWB#0], [Management], and [Telnet] in that order and set the necessary parameters to [Enable] in the [Telnet] window.
-Click [Switch], [GSWB#0], [Management], and [SSH Status] in that order and set the necessary parameters to [Enable] in the [SSH Status] window.