MMB
CHAPTER 3
(2)GUI operation
•Procedure
1Select an MMB for an update by clicking its radio button in [Select MMB(s) to update] in the [MMB Firmware
2Using the [Browse...] button or [Select a firmware file] in the [MMB Firmware
A confirmation dialog box opens with current firmware version information and update firmware version information displayed.
If the specified file does not contain MMB firmware, a warning dialog box opens with an error message displayed. Then, a consistency check is performed to check whether the version of MMB firmware in the specified file matches that in other firmware files. If the versions do not match, a confirmation dialog box opens to indicate that they do not match and ask whether to continue or cancel processing.
3Click [OK] in the confirmation dialog box to continue the update. The MMB firmware is updated.
•Checking after an update
zIf the [(Active)] MMB or [Both] was selected in [Select MMB(s) to update] in the [MMB Firmware
To update the firmware, reboot the MMB, and connect to the MMB again after the reboot. After establishing a connection to the MMB again, display the [MMB#x] window from the [System] menu, and check the MMB firmware version in this window to confirm the update.
If the firmware was not updated, the error status can be checked in the [System Event Log] window displayed from the [System] menu.
zIf the [(Standby)] MMB and not the [(Active)] MMB was selected in [Select MMB(s) to update] in the [MMB Firmware
The [MMB Firmware