GSWB 8.2 Configuration Definition Commands
(6)Error Messages
•% Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
•Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.2.14.3 speed
This command specifies the port speed:
zNo setting can be made for IO_Units 00 to 71 and TenGigabitEthernet 1/1 to 1/2.
zNo setting can be made for a
zThe port speed cannot be fixed at 1000 Mbps.
zIf auto is specified as the option, the duplex command setting is disabled because Auto Negotiation determines the duplex mode.
(1)Synopsis
•Specifies the port speed
speed {10 100 auto}
•Resets the port speed to the default value (auto) no speed
(2)Options
z{10 100 auto}
-10: The port operates at 10 Mbps.
-100: The port operates at 100 Mbps.
-auto: The port detects the appropriate setting automatically (default).