GSWB 8.3 Operation Commands
• % Not implement daughter card.
Cause: An unmounted interface is specified.
Action: Check the unit mounting status.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again, collect unit information, configuration definition information, and the information in different types of logs, and restart the unit. Alternatively, contact a certified service engineer.
8.3.3.2show interface counters
This command displays statistical information about an interface.
The statistical information is cleared by the clear ether statistics command.
(1) Synopsis
show interface counters
(2) Options
z
-IO_Unit 0
-GigabitEthernet
-TenGigabitEthernet
-FastEthernet
-port