GSWB 8.2 Configuration Definition Commands
(2) Options
z
Specifies the destination interface (GigabitEthernet 0/1 to 0/8, IO_Units 00 to 71, TenGigabitEthernet 1/1 to 1/2, ports 1 to 26).
(3)Command mode
Global
(4)See also
monitor session source
(5)Examples
•Sets GigabitEthernet 0/1 as the mirror port
Switch(config)# monitor destination interface GigabitEthernet 0/1 Switch(config)#
Switch(config)# show monitor destination
monitor destination interface GigabitEthernet 0/1 Switch(config)#
• Deletes GigabitEthernet 0/1 as the mirror port
Switch(config)# no monitor session destination Switch(config)#
Switch(config)#show monitor session destination no monitor session destination Switch(config)#
(6)Error Messages
•% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.