GSWB 8.3 Operation Commands
enabled exec
(4)See also
None
(5)Examples
•Returns to the [login] prompt after quitting the shell
Switch> quit
(6)Error Messages
•% Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
8.3.1.8telnet
This command is used to communicate with other hosts using the telnet protocol.
(1) Synopsis
telnet [<HOST>]
(2) Options
z<HOST>
Specifies the IP address of the telnet server. If this parameter is omitted, telnet subcommand mode is set.
(3)Command Mode user exec
enabled exec
(4)See also
None