MMB
CHAPTER 3
Button | Description |
Cancel | Cancels the settings made in this window. |
(1) Menu operation
[Maintenance] → [Firmware Update] → [PAL/SAL Firmware Update]
(2)GUI operation
1Select the units that store the PAL/SAL firmware to be updated in [Select SB(s) to update].
2Click the [Browse...] button, specify an update file containing PAL/SAL firmware, and click the [Update] button.
The partition that stores the PAL/SAL firmware to be updated must be reset, and a confirmation dialog box opens for confirmation to reset the partition. If the specified file does not contain PAL/SAL firmware, a warning dialog box opens with an error message displayed. Then, a consistency check is performed to check whether the version of PAL/SAL firmware in the specified file matches that of other firmware files. If the versions do not match, a confirmation/warning dialog box opens for confirmation to continue processing.
3Click the [OK] button in the confirmation dialog box to continue the update. Another confirmation dialog box opens with current firmware version information and update firmware version information displayed.
•If [all] or [specified unit(s)] was specified in [Select SB(s) to update], the [PAL/SAL Firmware
•If [specified partition(s)] was specified in [Select SB(s) to update], the [PAL/ SAL Firmware
4Click the [OK] button in the [PAL/SAL Firmware
To indicate the completion of the update, a confirmation dialog box opens when the update ends normally.
5Reboot the partition.
The firmware in the partition is actually updated.