MMB
CHAPTER 3
Item |
| Description |
Port | If [MMB] is set in [Connect to], input for this item is possible. | |
| A port number of 1024 or higher can be specified for a connection | |
| to a remote client for [Console Redirection]. | |
|
| |
Telnet/SSH | If [MMB] is set in [Connect to], input for this item is possible. | |
| Either [Telnet] or [SSH] can be selected for the protocol used in a | |
| connection to a remote client for [Console Redirection]. | |
| If [None] is selected, only the [Console Redirection] window of | |
| the | |
| • | Telnet |
| • | SSH |
| • | None |
|
|
|
Table 3.59 | Buttons in the [Console Redirection Switch] window | |
|
|
|
Button |
| Description |
Apply |
| Specify a redirection method and a port number, click the [Apply] |
|
| button, and the specified values are set. |
|
|
|
Cancel |
| Click the [Cancel] button to revert to the original settings. |
(1) Menu operation
[Partition] → [Console Redirection Switch]
(2)GUI operation
1Select settings in [Console Redirection Switch] and the [Telnet/SSH] by clicking radio buttons, and click the [Apply] button.
The specified switch values are then set.
•Example of operation with terminal software on a remote client
For a [Console Redirection] connection in the Partition#3 window in Figure 3.34, enter the following command:
#
# telnet <MMB_IP_address> 7003