MMB 3.6 Maintenance Menu
3.6.1.5BMC Firmware Update window
BMC firmware can be updated in the [BMC Firmware Update] window.
Note: When the BMC is updated, the BMC reboots itself, causing a temporary interruption in service. To prevent possible problems, Fujitsu recommends that partitions linked to the BMC to be updated be shut down before the update.
Figure 3.80 [BMC Firmware Update] window
Uninstalled devices and partitions that have not been configured are grayed out and cannot be selected.
Table 3.130 Displayed and setting items in the [BMC Firmware Update]
window
Item | Description |
Select BMM(s) to | Select the BMM units that store BMC firmware by clicking a radio |
update | button as follows: |
| • All: Used to select all BMMs installed in the system. |
| • Specified unit(s): Used to select either BMM board. |
| • Specified partition(s): Used to select a partition. |
| Only the check boxes of units next to a clicked radio button can be |
| checked. Other check boxes are grayed out, and input for them is |
| not possible. |
|
|
Select BMC firmware | Specify an update file containing BMC firmware. |
file |
|
|
|