PSA

CHAPTER 6 CLI Operations

6.3PSA Start/Stop Command (y30FJSVpsa)

The [y30FJSVpsa] command starts or stops the PSA.

Remarks:

-The execution of this command requires the root or Administrator privilege.

-Since PSA is a daemon program, it usually is automatically started at the time of boot.

-When PSA is stopped and restarted, all statuses contained in PSA are cleared.

Note: If you start PSA during SAF-TE operation command execution, PSA will not work normally. Start PSA after the command ends its processing.

(1) Synopsis

/sbin/service y30FJSVpsa start stop

(2)Options start stop

start: Starts PSA.

stop: Stops PSA.

(3) Examples

The following example starts PSA:

# /sbin/service y30FJSVpsa start

The following example stops PSA:

#/sbin/service y30FJSVpsa stop

(4)Exit status

0:Normal exit >0: Abnormal exit

6-8

C122-E003-02EN