MMB
CHAPTER 3
Table 3.73 Displayed and setting items in the [ASR (Automatic Server
Restart) Control] window
Item |
| Description |
Number of Restart Tries | Specify the number of OS restarts attempted following a timeout | |
| due to the Boot Watchdog or PSA software watchdog. | |
| The setting range is 0 to 10. | |
| The default setting is 5. | |
|
| |
Action after exceeding | Specify the action to be taken if the repeated restart attempts due to | |
Restart tries | a watchdog timeout or other causes exceed the above number of | |
| retries. | |
| The action types are as follows: | |
| • Stop rebooting and Power Off | |
| • | Stop rebooting |
| • | Diagnostic Interrupt assert |
| The default setting is [Stop rebooting and Power Off]. | |
|
| |
Automatic Power On | Specify the delay time before the | |
Delay | automatic restart. | |
| The setting range is 0 to 10 minutes. | |
| The default setting is 0 minutes. | |
|
| |
Cancel Boot Watchdog | Select [Cancel Boot Watchdog] to disable OS boot monitoring. | |
| By default, the check box is unchecked. | |
| Note: OS boot monitoring is a PSA function. The monitoring | |
|
| starts when the Boot Watchdog timeout time is set in the |
|
| PSA window. If the specified Boot Watchdog timeout time |
|
| is too short, however, a timeout may occur before the system |
|
| starts PSA, which can stop the Boot Watchdog timer. As a |
|
| result, repeated reboots may occur. In such cases, PSA has |
|
| not yet started, and the PSA page that provides the Boot |
|
| Watchdog function cannot be displayed, so the Boot |
|
| Watchdog cannot be displayed. Provided as a measure |
|
| against this problem, this check box disables the Boot |
|
| Watchdog without using PSA. |
|
|
|
Table 3.74 Buttons in the [ASR (Automatic Server Restart) Control] window
Button | Description |
Apply | Click the [Apply] button to: |
| • Set the specified values in items such as [Number of Restart |
| Tries] [Action after exceeding Restart tries]. |
| • Disable the Boot Watchdog if the [Cancel Boot Watchdog] |
| check box is checked. |
|
|
Cancel | Click the [Cancel] button to revert to the original settings. |