GSWB 8.3 Operation Commands

-port-channel 1-7

-InternalPort 1-8

-port 1-43

If this parameter is omitted, statistical information about all interfaces is deleted.

(3)Command mode user exec

enabled exec

(4) See also

show ether statistics show interface counter

(5)Examples

•Specifies all slots

Switch# clear ether statistics

Switch#

• Specifies the connector

Switch# clear ether statistics GigabitEthernet 0/1

Switch#

(6)Error Messages

•Port-channel ** is not defined.

Cause: An undefined channel group is specified.

Action: Check the channel group definition.

• % Not implement daughter card.

Cause: An unmounted interface is specified.

Action: Check the device implementation status.

• % Incomplete command.

Cause: Incomplete command input

Action: Enter the command string correctly.

C122-E003-02EN

8-293