PSA 5.14 Setup Menu
2Click the [OK] button in the [Confirm Settings] dialog box. The Watchdog monitoring settings are set.
When setup is successfully completed, the [Watchdog] window is displayed again.
If setup terminates abnormally, the [Abnormal Settings Report] dialog box opens.
3Click the [OK] button in the [Abnormal Settings Report] dialog box. The [Watchdog] window is displayed again.
•Setting up Watchdog monitoring (when incorrect values are entered)
1Select and enter values for the Watchdog monitoring settings, and click the [Apply] button.
If the entered values are incorrect, the [Input Value Error] dialog box opens.
2Click the [OK] button in the [Input Value Error] dialog box. The [Watchdog] window is displayed again.
5.14.2S.M.A.R.T. window
The [S.M.A.R.T.] windows allows you to specify whether to perform S.M.A.R.T. monitoring for HDDs in order to detect warning signs of impending failures. This setting can only be changed by users who have been granted the setting privilege.
The setting is implemented for all disks at the same time.
The target disks are as follows:
zInternal disks (except disks that do not support S.M.A.R.T. monitoring)
zExternal disks (except RAID units and disks that do not support S.M.A.R.T. monitoring)
Figure 5.26 [S.M.A.R.T.] window