GSWB 7.9 Spanning Tree Menu
Table 7.80 Displayed and setting items in the [Interface Setting] window
Item | Description |
Port Priority | Specify the port priority. The lower the port priority, the higher the |
| probability of forwarding. |
| • Setting range: 0 to 255 (default: 128) |
|
|
Cost | Specify the interface path cost: |
| • Setting value: [Auto] or [Specify] |
| If [Specify] is specified, specify a value ranging from 0 to |
| 65535. (default: Auto) |
| • If [Auto] is specified, the default value is as follows: |
| |
| |
| |
| |
|
|
Spanning Tree | To enable STP for the specified interface when STP is enabled for |
| the whole device, check the check box of the interface. (Default: |
| on, except IO_Unit interface) |
|
|
Table 7.81 Buttons in the [Interface Setting] window
Button | Description |
Help | Displays the Help window. |
Apply | Sets the specified values. |
Cancel | Closes the window without saving the change. |
(1) Menu operation
[Switch] → [GSWB#x] → [Spanning Tree] → [Interface Setting]
(2)GUI operation
•Setting
1Confirm that [Enable] is selected for [Spanning Tree Protocol] in the [Global Setting] window.
2Enable an interface in [Spanning Tree].
3Specify values in [Port Priority] and [Cost].
4To disable STP on the interface, uncheck the [Enable] check box in [Spanning Tree].
5Click the [Apply] button.