GSWB 8.2 Configuration Definition Commands

• Input parameter error.

Cause: An invalid parameter was specified.

Action: Specify the correct parameter.

8.2.12.4 ip igmp snooping vlan static

This command adds a layer-2 port to a multicast group:

zIf a channel group is specified in <interface-id>, the anchor port is added to the multicast group.

zThe maximum number of registered multicast groups, which consist of dynamically registered groups and groups registered statically by commands, is 252.

zIf the MAC address table has no free space, no multicast group can be registered.

(1)Synopsis

•Adds a layer-2 port to a multicast group

ip igmp snooping vlan static <mac-address> interface <interface-id>

• Deletes a layer-2 port from a multicast group

no ip igmp snooping vlan static <mac-address> interface <interface-id>

(2) Options

z<mac-address>

Specifies a static group MAC address.

z<interface-id>

Specifies the interface and port number (GigabitEthernet 0/1 to 0/8, IO_Units 00 to 71, TenGigabitEthernet 1/1 to 1/2, port-channels 1 to 7, and ports 1 to 33) of the port to be added to a multicast group.

(3) Command mode

VLAN configuration mode

(4) See also

ip igmp snooping

C122-E003-02EN

8-93